Valve Sizing Tool Log-in

Horne Optitherm thermostatic medical tap with single short levers

TBT1-230SL

Includes wall-mounting spigot, integral isolating valves, high capacity fine mesh strainers, check valves, thermostatic cartridge and 6 L/min flow regulator/conditioner. Wall to outlet distance = 230mm. Single short levers. To be installed according to the manufacturer's instructions and commissioned in accordance with water regulations and bylaws using the Optitherm Flushing boot or kit.

Recommended for pairing with janitor's or sluice sink.

Designed and manufactured by Horne Engineering Ltd

Enquire about this product

Applications

Suitable for non-clinical warm and cold water handwash, drinking and teeth cleaning (where supplies are potable) or bath fill applications.

Horne Optitherm Thermostatic Tap TBT1-200SL (with single short levers) over hand wash basin

Features

Mixed water dead leg eliminated as required by HTM 04-01
HBN 00-10 (supercedes HTM 64) compliant design
hot and cold tap in one - increases cold water turnover and no need for additional cold water outlet
as per HTM 04-01 the tap does not drain down on lever closure
Safe surface temperature - complies with HGN Safe Hot Water and Surface Temperatures
Levers with vandal resistant clutch mechanism
Pleasant hand wash experience - comfortable temperature and flow with no splashing
Easy to clean
outlet fitting - 6 l/m flow regulator/conditioner provides energy and water efficiencies (removable for bath fill applications) and contributes to BREEAM rating
outlet fitting removable for cleaning and autoclaving
accessible from tileside for ease of maintenance
Modularity allows for easy removal and substitution when maintenance is required
Patents granted for TMV with cold water bypass (dedicated cold tap) and ease of serviceability

Accessories

Standards and Approvals

The HORNE OPTITHERM thermostatic tap is designed to meet the requirements of BS7942:2000, 'Thermostatic mixing valves for use in care establishments' and is approved, under the TMV3 Scheme, to NHS Model Engineering Specifications D 08 Thermostatic mixing valves (Healthcare premises).
All materials in contact with water are WRAS approved.
All HORNE products are manufactured under our Quality Management System to BS EN ISO 9001:2015. Certificate No. FM 01224