HEATSTAT T2 (TMV2 Scheme Approved)

Specially designed for the domestic market to reduce the potential for scalding accidents. From 1 May 2006 (Scotland) and 6th April 2010 (England, Wales & NI), all new build and refurbished dwellings require to have a thermostatic mixing valve fitted to the bath. The TMV T2 is approved to all Type 2 designations, including low pressure bath applications (Heatstat T2 DN20).  Requires installation kit.

The two newsletters below detail give further detail on the Water Burns Like Fire campaign for safe warm water in the domestic setting and the subsequent changes to the Scottish Building Standards.  More recently, changes introduced into Part G of the UK Building Regulations state that bath water must not to exceed 48°C and this can be achieved by fitting a Type 2 TMV.

All Heatstat T2 TMV configurations are listed below. Use the check box to add the installation kit. The line drawing and product code will automatically update when the check box settings are altered.

Useful Documents

TMV2 Newsletter 2
PDF1591 KB
TMV2 Newsletter 1
PDF103 KB
Heatstat T2 Type 2 TMV

Click on thumbnails to see larger image


HEATSTAT T2 DN20 TYPE 2 THERMOSTATIC MIXING VALVE

HEATSTAT T2 DN20 TYPE 2 THERMOSTATIC MIXING VALVE

Includes

  • Check valves

and with Installation Kit further includes

  • Full bore strainers
  • Isolating valve
  • outlet stud coupling
  • Compression fittings for 22mm copper pipe

 


Select Options

T20-10B



Quick codes: T20-10B | T20-10B and IK20-21B

HEATSTAT T2 DN15 TYPE 2 THERMOSTATIC MIXING VALVE

HEATSTAT T2 DN15 TYPE 2 THERMOSTATIC MIXING VALVE

Includes

  • Check valves
  • Outlet stud coupling
  • Compression fittings for 15mm copper pipe

and with Installation Kit further includes

  • Full bore strainers
  • Isolating valves

Select Options

T15-10B



Quick codes: T15-10B | T15-10B and IK15-21B