Accessories - Pipe Cover

The pipe cover is suitable for installations where it is important that there be no exposed pipework such as in secure or mental health settings. The pipe cover can be used to conceal the pipework between the ceiling and the top of the shower panel as shown in the pictures opposite. This image shows the pipe cover complete with flanged ceiling cuff which covers the inevitable gap between the pipe cover and the ceiling. For offsite fabrication, it may be preferable to cut the ceiling to match the profile of the panel such that the ceiling cuff is not required.

The white (RAL 9010), epoxy coated pipe cover, which is constructed from extruded aluminium, matches the profile of the shower panel. It is available in two lengths: 465mm and 940mm, which can be cut to the relevant height for the specific installation. Part numbers for the two pipe covers are SA-465PC and SA-940PC respectively and both can fitted to all surface mounted shower panels excepting the SP-200A Sports Panel and the panels in brushed stainless steel finish, SP-110ASS and SP-110ASSLR.

Horne Engineering Ltd, PO Box 7, Rankine Street, Johnstone, SCOTLAND, PA5 8BD
Tel: +44 (0) 1505 321455 Fax: +44 (0)1505 336287 Email: sales@horne.co.uk